Warrington & Cheshire
Wet Room Installation in Warrington
Properly Tanked & Tiled Wet Rooms Across Warrington & Cheshire
Approved Member
The Tile Association
5★ Google Reviews
Verified Reviews
23+ Years Experience
One Specialist Craft
Fully Insured
Public Liability
A wet room done properly requires more than tiles on a wall. The waterproofing system beneath is what makes it work long-term. I provide full wet room installation in Warrington — from floor preparation and tanking through to final tiling, drainage fitting, and siliconing. No shortcuts on the stages that matter most.
What's Included
- Full substrate assessment before any waterproofing begins
- Floor prepared with correct falls to the drainage point
- Tanking membrane applied to all floor and wall surfaces in the wet zone
- Board joints taped and sealed before tiling
- Linear or point drain installed correctly and flush with tile surface
- Large-format or standard tiles installed to floor and walls
- Epoxy grout used throughout wet areas for maximum durability
- All movement joints siliconed with sanitary-grade product
Preparation Examples
Jackoboard installation — shower walls prepared before tilingWhy Jackoboard instead of plasterboard?
Standard plasterboard absorbs moisture and will deteriorate behind tiles in wet areas — often causing tiles to debond or grout to crack within a few years.
Jackoboard is a waterproof foam-core construction board, not a cement board. It's made from extruded polystyrene (XPS) with a reinforced cement coating on the surface for tile adhesion.
It doesn't absorb water, stays dimensionally stable, and provides a reliable base for tiling in wet areas. Mechanically fixed, with joints taped and sealed, it creates a substrate that properly supports a long-lasting tiled finish.
Preparation-First Approach
Design & Layout Planning
Falls to the drain planned before any work starts. The floor gradient needs to be correct from day one.
Boarding & Substrate
Walls boarded where required with tile backer board. Not plasterboard — this is a wet room.
Tanking
Approved tanking system applied to all surfaces in the wet area. This is the most critical stage.
Tiling
Tiles installed with correct adhesive for wet environments. Joints consistent throughout.
Finishing
Grout, silicone, and a final check of all drainage falls. Ready to use immediately.
Areas Covered
I provide wet room installation across Warrington and Cheshire. See the full Cheshire tiling page for all locations, including:
Frequently Asked Questions
How much does wet room installation cost in Warrington?
Cost depends on the size of the area, the materials involved, and how much preparation the substrate needs. I provide clear, itemised quotes after a site visit — no vague estimates.
Do you prepare the floor / substrate before tiling?
Always. Every project starts with a thorough assessment — level, movement, moisture. Where needed, self-levelling compound is applied and fully cured before any tiles go down.
Are you insured and accredited?
Yes. I'm a Member of The Tile Association and carry full public liability insurance. Both certificates are available on request.
Do you work across Cheshire or just Warrington?
I work across the whole of Cheshire and South Manchester — including Altrincham, Hale Barns, Knutsford, Wilmslow, Alderley Edge, Prestbury, and further afield.
Get a Free Quote
No obligation. I'll visit your property and give you a clear, honest price.
Send a Message 01925 899 755WhatsApp MeRelated Services
Ready to Get Started?
Call or message today for a free quote on your wet room installation project in Warrington.